LED Fixtures

Infinity Raccoon W40/4

 

The Infinity Raccoon W40/4 is a powerful wash light with 40 RGBM LEDs of 15 W each, producing up to over 41,000 lumens. It has 5 individually controlled sections, has a 10-degree beam angle and uses a high 12,000 Hz refresh rate for a smooth and stable light output. Four internal dimming curves are available. It uses the same housing as the Raccoon S420/4 and is IP65-rated to withstand the elements during your show.
The fixture can be controlled wirelessly via DMX (LumenRadio G3, G4, CRMX), via wired DMX (5-pin XLR) or via manual controls and the on-board OLED display. It supports RDM and provides bi-directional communication with the lighting console.
With the optional L-bracket, the Raccoon W40/4 can be mounted vertically or at an angle while still being balanced (no torque on the mount). Other optional accessories include a top hat, a barndoor, a range of diffusers with 20°, 40°, 90° and 15 x 60° beam angles and a sturdy flight case.

Showtec Helix M1000 Q4 Mobile LED Wash

 

The Helix M1000 Q4 Mobile is a battery powered 8 x 10 W RGBW LED Wash with IP65 rating, suitable for mobile and outdoor applications. Its 10° beam angle can be widened to a 20°, 40°, 15° x 60° and 90° beam angle by using a dedicated beam shaper. Equipped with a rechargeable Lithium Ion battery, the Helix M1000 Q4 can operate up to 15 hours without charging. It can be manually flipped 180° and can be controlled via W-DMX (wireless), DMX, Master/Slave in Manual and Auto-run mode with many built-in programs.

 

Up to 15 hours without charging

IP65 rated, suitable for outdoor applications

10° beam angle

Optional beam shapers for widening beam angle

180° flippable

W-DMX (wireless)

Highlite Helix S5000 Q4 LED Wash

The Helix S5000 Q4 is a bright 40 x 10 watt RGBW LED Wash with IP65 rating, suitable for outdoor applications. Its 10° beam angle can be widened to a 20°, 40°, 15° x 60° and 90° beam angle by using a dedicated beam shaper. The Helix S5000 Q4 LEDs can be devided into 5 separate sections for creating stunning effects. The Wash can be manually flipped 180° and can be controlled via W-DMX (wireless), DMX and Master/Slave in Manual and Auto-run mode with many built-in programs.

 

IP65 rated, suitable for outdoor applications

10° beam angle

Optional beam shapers for widening beam angle

5-section control

180° flippable

W-DMX (wireless)

Showtec Polar Wash 740

The Showtec Polar Wash 740 is a powerful yet compact and lightweight LED wash moving head with zoom and LED ring effect, suitable for indoor and outdoor applications. Despite its size, its 7 RGBL LEDs of 40 watts each can produce a combined output of over 4000 lumens. With the addition of the lime LED, it achieves a CRI of 85 for its white colours. The Polar Wash 740 creates anything from a vibrant beam of 3.5° to a 44° wash with its motorised zoom. The 7 RGBL LEDs can be controlled in two sections: the centre LED and the outer LEDs. The LED ring around the 7 LEDs can be controlled separately and creates fascinating graphic patterns in selectable colours. You can also index, rotate and bounce these patterns to your own liking.
The Polar Wash 740 has an adjustable PWM, making it suitable for touring and TV applications. Its low noise level of just over 36 dB in silent mode allows for use in noise sensitive applications. The fixture can be controlled via DMX/RDM. It is IP65 rated, allowing for use in the harshest environments. Weighing 9.8 kg, it is light and compact.

INFINITY S201 SPOT FURION SERIES

The Infinity Furion S201 Spot is a 150w LED light source moving head, capable of very fast movements but also the ability to stay very smooth while slowing down, even with abrupt stops. Featuring 2 colour wheels, 6 rotating glass and 8 fixed metal gobos, a 3-facet rotating prism and a 1:2.5 zoom ratio from 12º to 30º, make amazing mid-air effects or dramatic beam projections with optics that are extremely fast and precise, ensuring your projection will always be crystal clear.

Features:

  • 150w 7500K White LED Engine
  • Manual, Stand Alone or 17 & 23 Channel Control Modes
  • DMX, sACN, Art-Net and RDM Supported
  • Multiple Dim Curves and adjustable PWM Settings
  • On board WDMX by WDMX Sweden
  • Weighs 20.3 Kg
41505 Infinity S201 Spot furion

INFINITY S401 SPOT FURION SERIES

The Infinity Furion S401 Spot is a 350w LED light source moving head, which offers a 5:1 ratio zoom range from 6º to 30º. Produce very fast and precise colours with CMY colour mixing with incorporated CTO and seperate colour wheel. Create awesome projections or mid –air effects with 2 gobo wheels (6 rotatable glass / 7 static metal gobos), 3 facet circular or 5 facet linear roating prism, motorized iris, bi-directional continuous rotating animation-wheel and Digital Motion FX. Switching from fast movements to smooth moves is no issue. This spot is a true powerhouse which produces a razor-sharp beam with clear visuals.

Features:

  • 350w 7500 K White LED Engine
  • Manual, Stand Alone or 26 & 37 Channel Control Modes
  • DMX, sACN, Art-Net and RDM supported
  • Multiple Dim Curves and adjustable PWM Settings
  • On board WDMX by WDMX Sweden
  • Weighs 29 Kg
41506 Infinity S401 spot furion

Infinity TS-260C7 PROFILE ENGINE

With the TS 260C7 you can produce perfectly calibrated colours by using the  7 colour Lumiled LED profile engine. Offering a CRI value consistently over 96. Equipped with 7 different DMX modes.

Features:

  • Delivers the performance of a 750W Tungsten halogen unit
  • 260W Lumiled 7 colour LED engine using custom designed array
  • CRI consistently over 96 on full CCT range
  • LED colour linearity compensation
  • LED colour temp drift compensation
  • Optics colour shift compensation
  • Colour wheel with 64 spectrum matching filter gels
  • 2000-8000K Seamless CCT channel
  • RGB, CMY and HSI colour control
  • 16 bit intelligent high resolution virtual dimming
  • Tungsten mode with natural colour drift and timing simulations
  • RDM allowing for remote setting and recall of information
  • Custom design silent cooling system
  • 1CH DMX mode for conventional replacement
200010 TS 260c7 Profile engine

Infinity TF-260C7 FRESNEL 15-50

The Infinity Signature TS 26oC7 Fresnel is perfectly equipped for theatre and film applications. With Tungsten simulation, RGB, CMY or HSI control, the desired colour is at your fingertips. Zoom focus mechanism both manual and dmx motorised allows a zoom range of 15°-50°.

Features:

  • Delivers the performance of a 1kW Tungsten halogen unit
  • 260W Lumiled 7 colour LED engine using a custom designed array
  • CRI above 96 on full CCT range
  • LED Colour Linearity compensation
  • LED Colour temp drift compensation
  • Optics colour shift compensation
  • Manual and motorised 15-50 zoom control
  • Colour wheel with 64 spectrum matching filter gels
  • 2000-8000K seamless CCT Channel
  • 16 bit intelligent high resolution virtual dimming
  • Tungsten mode with natural colour drift and timing simulations
  • Custom design silent cooling system
  • 1CH DMX mode for conventional replacement
200203 TF 260c7 Fresnel 1550

Infinity TF-300 FRESNEL 15-50

The TS-300 Fresnel 3200K is the perfect choice for a broad presentation, spreading an even warm white light around the stage. The zoom focus mechanism is easy and intuitive, both manually and motorized by DMX applicable between 15° to 50°.

Features:

  • Delivers the performance of 1kW Tungsten halogen unit
  • 300W, 3200K Custom designed Lumiled Engine
  • Manual and motorized 15° -50° zoom control
  • CRI > 96 Consistently
  • Consistent colour temperature regardless of intensity
  • 16 bit Intelligent high resolution virtual dimming
  • Factory calibrated
  • RDM allowing for remote setting and recall of information
  • Custom design silent cooling system
  • Neutrik connections
200200 TF 300 fresnel _

Infinity IW 741

The Infinity iW-741 is a compact power-pack moving wash which is equipped with 7 RGBW 40W Osram LEDs. Specially selected motors provide ultrafast and precise movements. In combination with motorized zoom a razor sharp 3,6° beam can be produced which changes into a 60° wash effect through various available controlling protocols.

Features:

  • Ultrafast movements
  • Zoom 3,6° to 60°
  • Selectable PWM rate by DMX
  • Battery powered display
  • White Output Mode
  • RDM

Infinity IW 1941

The Infinity iW-1941 moving head washer with a motorized zoom, creating a beam from 3,6° to 60°, produces a massive output due to the use of 19 RGBW 40W Osram Leds.  The iW-1941 combines very fast movements, a wide zoom-range and a powerful output to create spectacular light effects.

Features:

  • Pixel control
  • Zoom 3,6° to 60°
  • Selectable PWM rate by DMX
  • Battery powered display
  • White Output Mode
  • RDM

Astera AX3 Lightdrop™

The Lightdrop™ is an IP65 waterproof, RGBW wireless
spotlight. It has a magnetic underside so it can be hung from ceilings, walls or under tables, it can also be used as an angled spotlight with its adjustable stand or hung on a
traditional bar with a hook clamp

RGBW Cree LED Chip
TruColor™ Calibration
Dynamic Power-boost
CRMX Wireless DMX + W-DMX compatible
IP65 Waterproof
Long-life SAMSUNG Battery
Extremely high luminous power
Charging/Carry Case available (holds 8)

Astera AX5 : 3-in-1 Perfect Par

45W RGBAW  (3x 15W)  – 13° Beam Angle

Control:
Range: 300m | 330 Yards
DMX: Supports CRMX and W-DMX
Wired DMX

Optical:
Colours: RGBAW Philips Lumileds
CRI: 92
Total LED power: 45W
Luminous Flux: 1080Lm
Pixels: 1

Astera Perfect Par AX5, LED lighting hire, Event lighting hire

Rosco Image Spot

Power Consumption: 45 Watts at maximum output
Output: 3000 lumens
LED Color Temperature: 5500K
Integrated Filter Chamber
Manual or DMX control
Crystal clear optics

 

Rosco image spot, rosco projector, gobo projector, LED projector